23 Oct SGL DEVELOPED HIGH – PERFORMANCE LONG LIFE GREASES
Siddharth Grease & Lubes Pvt Ltd. has developed high-performance premium lithium complex greases with NLGI 3 consistency having smooth & homogeneous structure. This greases containhighly refined virgin base oils, Lithium Complex thickener and performance booster additives with excellent mechanical and roll stabilities for providing long service life of over 80,000& 100,000 Kms under ideal trial conditions. Grease with service life of 200,000 Kms are truly excellent long-life greases designed by using synthetic oilproviding outstanding thermo-mechanical stability characteristics for ultra-long field life. All these greases are having high dropping point, excellent oxidation stability and exhibiting excellent performance in “Wheel Bearing Life Performance” test (ASTM D 3527).All these grades are designed to combat surface protection of bearings against rust, corrosion and wear even under humid conditions. These products are recommended for high way /off highway moderate to heavy duty commercial vehicles.
Products can be designed in different colours
Comparative Specification Data of SGL Long Life Greases for80,000 km, 120,000 km & 200,000 Km
| S.N | Test Parameters | Test Method | SGL Super Long Life Grease 80,000 km | SGL Hyper Long Life Grease 120,000 km | SGL LONG LIFE GREASE 200,000Km |
| 1 | Appearance | Visual | Smooth & Homogeneous | Smooth & Homogeneous | Smooth & Homogeneous |
| 2 | Color | Visual | Red/As per customer | Olive Green/As per customer | As per customer |
| 3 | NLGI Consistency class | ASTM D-217 | 3 | 3 | 3 |
| 4 | Thickener | Internal | Lithium Complex | Lithium Complex | Lithium Complex |
| 5 | Penetration worked,60,mm/10 | ASTM D-217 | 220-250 | 220-250 | 220-250 |
| 6 | Wheel Bearing Leakage test, g | ASTM D 1263 | 5 max | 3 max | 3 max |
| 7 | Base Oil, KV @ 40° C, cSt | ASTM D-445 | 160-200 | 180-240 | 180-240 |
| 8 | Dropping Point,° C | ASTM D-2265/ D 566 | 230 min. | 260 min. | 260 min. |
| 9 | Copper Strip Corrosion @ 100 C, 24 hrs. | ASTM D-4048 | 1b max | 1b max | 1b max |
| 10 | Water washout, mass % loss | ASTM D-1264 | 7 max | 3 max | 3 max |
| 11 | Oil separation, mass % loss | ASTM D 1742 | 4 max | 2 max | 2 max |
| 12 | 4 Ball Weld load (Kgf) | ASTM D-2596/IP 239 | 250 min. | 315 min. | 315 min. |
| 13 | 4 Ball wear scar diameter, mm | ASTM D 2266 | 0.6 max | 0.5 max | 0.5 max |
| 14 | Corrosion prevention Properties | ASTM D 1743 | Pass | Pass | Pass |
| 15 | Dynamic Rust test in D/W | ASTM D 6138 | 0,0 | 0,0 | 0,0 |
| 16 | Wheel Bearing Life Performance test, hrs. | ASTM D 3527 | 110 hrs. min. | 175 hrs. min. | 225 hrs. min. |
| 17 | Roll stability after 50 hrs. at 80 deg. C , change in % | ASTM D 1831(Modified) | 25 max | 20 max | 20 max |
| 18 | Shelf Life (Under ideal storage conditions) | Storage Stability Study | 48 months | 48 months | 48 months |
| 19 | Mileage claim under ideal test conditions | Based on our co related study of Rig Data’s& Field trials | 80,000 km min. | 120,000 km min. | 200,000 Km min. |
| 20 | Actual Field Trial Data |